Activator II by Draw-Tite Apply your trailer's brakes as soon as the brake pedal is engaged!
Mounts anywhere - no leveling required!
FREE SHIPPING! NO SALES TAX! The price you see is the price you pay!
Draw-Tite's Activator II Electronic Brake Control for trailers with electric brakes applies the trailer's brakes electronically as soon as the brake pedal is engaged. Competing pendulum models react to inertia created after the tow vehicle's brakes have already begun to stop. Since Activator II has no moving parts or pendulums to adjust, they can be mounted in virtually any position and require no leveling - ever. Their slim, compact design and contoured shape are combined to provide more under-dash clearance than any other brake control. A conventional four wire hook-up is illustrated in easy-to-follow instructions. Mounting bracket and hardware are included.
The amount of braking power (output) and rate of application (sync) are both adjustable for the individual driver's preference, road conditions, type of trailer and load. The driver can control the amount and rate of braking from soft to aggressive and the brakes can be manually applied. For ease of adjustment, an output control is located on the front of the Activator II. Activator II has a thumb wheel adjustment and its output indicator is a digital display, which shows the output when the brakes are applied. The sync control is a slide adjustment located on the side of all the brake controls. Activator II output indicator will digitally display the sync setting. In case of an overload, caused by either a short of low power, Activator II will display an overload warning. The manual control is activated by squeezing the trigger located on the front of the Activator II and its use will illuminate both the tow vehicle and trailer stop lights as required by National Highway Traffic Safety Administration regulations.
Activator II is made for 2, 4, 6 and 8 brake trailers. The wiring kit for 5500 Activator II Brake Control, includes 25 ft. 12-2 duplex wire, 30 amp circuit breaker and attaching terminals. This kit must be purchased separately. |
 | For use with 2, 4, 6 and 8 brake trailers. |
| Digital output indicator. |
| Thunb-wheel output adjustment. |
| Overload indicator to warn you of developing problems. |
| Lifetime limited warranty. |
|
| Weight: | 0.5lbs | | Quantity: | Sold Individually | | Installation Difficulty: | Handyman Skills | What is this? | | Delivery Areas: | 48 Continental US Only | | Warranty: | Lifetime Limited Warranty |
| IMPORTANT NOTES | - Wiring kit is a special order item and is non returnable.
|
Draw-Tite was started in 1946 by Bill Whichello. Bill was an inventor and his first product was a clothesline tighetner. He called it a Draw-Tite. Unfortunately, that was about the time residential clothes dryers became popular and there was not much call for the original Draw-Tite. Fortunately, Bill was also an avid RV’er. He built a trailer hitch for his car and, since he already had the name copyrighted, he called it a Draw-Tite. Soon, Draw-Tite became a symbol of craftsmanship in the towing industry.
Over fifty years and millions of trailer hitches later, the same care and patience is put into every hitch built today as Bill Whichello did fifty years ago. Also the use of technologically advanced equipment and with the most experience in the industry, Draw-Tite meets the challenges of today’s tow vehicles. |
|
