Aventa LX Tow Bar and Base Plates by Blue OxAventa has extremely strong attachment between coach and tow vehicle!
FedEx/UPS Ground shipping free on ALL products, fast shipping from our many warehouses and total cost shown on each page so you know before checkout.
| Info about your RV Product |
Aventa LX Tow Bar by Blue Ox is a Class IV 10,000 lb. Rated 10,000 lb tow bar. The Aventa LX has a ball in socket design with a new spherical joint instead of a flex joint that is bolted together. This Blue OX design reduces wear points and allows for a very strong and durable attachment between the coach and the towed vehicle. The Aventa LX with 2 inch receiver tube are self aligning and self storing. They have easy release handles with lubricated and sealed legs that open and close for easy hook up and un hooking. Maintenance is reduced with the rubber boots to keep the Aventa free of road dirt.
Below you can also order your fitted Blue Ox Base Plate, or select No Thanks. |
 | Cutting edge ball-in-socket design |
| Off-set triple lugs to better align towing forces |
| Self tightening picot connection |
| Rubber boots to protect from road grime |
| Dependable steel construction |
| Class IV tow bar, for use with towed vehicles up to 10,000 lbs |
| Legs collapse & extend to lock for easy hook-up |
| Hook up is a cinch - the 360 degree swivel allows you to be out of alignment or on uneven surfaces |
| The ultimate in quick disconnecting |
| Weighs approximately 42 lbs |
| Three year manufacturer warranty on tow bar |
|
| Product Weight: | 42lbs | | We Deliver To: | 48 Continental US Only | | Manufacturer Warranty: | 3 Year Manufacturer Warranty |
| Product NOTES - Read these: | - Base plates must be ordered separately.
|
Today Blue Ox products account for the vast majority of our revenue; however, our company traces its roots to the Automatic Curry and Dipping Machine founded in 1926 by Rollie McQuistan. The purchases of the Blue Ox line of tow bars and base plates in 1991 and the Duncan line of tow bars and brackets in 1994, coupled with the development of braking systems, trailer hitches, TruCenter steering products, and other accessories have solidified our position as a leader in the Recreational Vehicle and Towing Industries. All of these products are manufactured in our Pender, NE facility. |
1. Bumper fascia must be removed and replaced during installation.
2. Requires some trimming of bumper (fascia, plastic, and/or grill).
3. Requires some drilling (not major).
4. Requires some trimming of the air dam.
5. Requires some trimming of the belly pan.
6. Headlights must be removed and replaced during installation.
7. Steel belly pan must be removed and remain off the vehicle after installation.
8. Fog lights must be removed and remain off the vehicle after installation.
9. Tow hooks must be removed and remain off the vehicle after installation,
11. The weight of this vehicle is near the Class III, 5000 lb, rating limitations. Some models, depending on options, may well exceed this 5000 lb rating. Be sure to confirm the weight of your individual vehicle before towing. As of 1999 the Aventa II is now rated at 10000 lbs and either the Aventa II or Alexus tow bar must be used for these applications. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.
12. Baseplate has non-24'' spaced attachment tabs. Requires either a motorhome mounted tow bar or an adapter to utilize a car mounted tow bar. The BX88153 adapter can not be used on non 24" baseplates. See "Accessories" on back page. Tow bar adapters are not to be used with vehicles weighing over 5000 lbs.
13. Use only with motorhome mount tow bars or the BX8833 or BX88151 adapters. Removable tabs with only one hole will not attach to car mount tow bars or other adapters. The Acclaim may only be used with removable tab baseplates that have 22" or greater spaced tabs. The Adventurer may be used with baseplates having 24"-40" spaced removable tabs. The Ambassador may only be used with 24" spaced removable tabs.
14. Due to a tail light bulb out indicator in the wiring system, Jeep Grand Cherokee's must be wired with a BX8869 wiring kit. The BX8811 wiring kit can not be used. 15. Specific dinghy towing restrictions apply. They may include specific towing speeds and distances, and/or lubricating the transmission and transfer case with the engine idling, then running selector through the gears. Other restrictions may also apply. Confirm the towability and pre-towing procedures of your vehicle with the owner's manual or contact the vehicle's manufacturer for specific towing procedures.
15. Specific dinghy towing restrictions apply. They may include specific towing speeds and distances, and/or lubricating the transmission and transfer case with the engine idling, then running selector through the gears. Other restrictions may also apply. Confirm the towability and pre-towing procedures of your vehicle with the owner's manual or contact the vehicle's manufacturer for specific towing procedures.
32. Early 99's were produced with the same body style as the 98's, then later models have the new styling. The new style chassis has amber rear turn signals instead of red.
45. Due to the design of the baseplate, a second 5/16" hole can not be drilled to accommodate the RangeFinder II towbar.
47. The BX88152 adapter can not be used with this baseplate. |
|
Ask Us
