RV Inverter Charger ME Series by Magnum Energy RV Inverter Modified Sine Wave ME Series with a five-state battery charger.
RV Inverter/Charger designed for RV use.
Our product pages show total cost, no add-ons at checkout. Ground orders ship free, some Freight orders also ship at no cost to you.
| Info about your RV Product |
RV Inverter Charger designed by Magnum Energy especially for RV use and the difficult conditions RV'ers can face. Powerful RV Inverters were made to be simple to use.
Reliability and Safety are very important to Magnum Energy, so the ME Series Inverters/Chargers are ETL Listed to the demanding requirements of UL/cUL 458, CSA C22.2 #107.1-01.
What good is an inverter if it's difficult to install! The ME Series RV Inverters were made so they could be installed in 4 easy steps.
1) Connect inverter`s output to your distribution circuits or electrical panel
2) connect power cable (AC) to the inverter`s easy to reach terminal block
3) Connect the batteries
4) Switch on the power!
| Inverter Specifications | ME2012 | ME2512 | ME3112 |
| Input battery voltage range | 9 - 16 VDC | 9 - 16 VDC | 9 - 16 VDC |
| Nominal AC output voltage | 120 VAC | 120 VAC | 120 VAC |
| Output frequency and accuracy | 60 Hz plus minus 0.005pcnt | 60 Hz plus minus 0.005pcnt | 60 Hz plus minus 0.005pcnt |
| 1 msec surge current (amps AC) | 60 | 100 | 120 |
| 100 msec surge current (amps AC) | 37 | 45 | 50 |
| 5 sec surge power (real watts) | 3700 | 5000 | 6000 |
| 30 sec surge power (real watts) | 3450 | 4500 | 4800 |
| 5 min surge power (real watts) | 3100 | 3500 | 3950 |
| 30 min surge power (real watts) | 2400 | 2900 | 3500 |
| Continuous power output at 45deg C | 2000 VA | 2500 VA | 3100 VA |
| Rated input battery current | 191.0 ADC | 239.1 ADC | 296.5 ADC |
| Inverter efficiency (peak) | 95pcnt | 91pcnt | 90pcnt |
| Transfer time | 16 msecs | 16 msecs | 16 msecs |
| Search mode | .2 ADC | .2 ADC | .2 ADC |
| No load (120 VAC output) | 0.87 ADC | 0.95 ADC | 0.97 ADC |
| Waveform | Modified Sine Wave | Modified Sine Wave | Modified Sine Wave |
| Charger Specifications | | | |
| Continuous output at 45deg C | 100 ADC | 120 ADC | 160 ADC |
| Charger efficiency | 85pcnt | 85pcnt | 85pcnt |
| Power factor | > .95 | > .95 | > .95 |
| Input current at rated output (AC amps) | 15 | 18 | 21 |
|
 | Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger - using only 15 amps per 100 amps versus 23 amps used by standard chargers. |
| Choices: The ME Series comes in three power models, allowing you to choose the model that is right for you. |
| Versatile mounting: Mount the ME Series on a shelf or bulkhead or even upside down. |
| Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance. |
| Multiple ports:The ME Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port. |
| Accessible design: The extra large AC access cover with terminal screw block and 360deg DC connection terminals with covers make this inverter more accessible when it needs to be. |
| Convenient switches:The ME Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator. |
| Expanded transfer relay: 60 Amp transfer service is
available on all models.
Buy with ease: The ME Series is backed by a three-year, 36-month limited warranty. |
| Transfer relay capability 2 legs at 30 A for 120 V/30 A or 240 V/60 A service |
| Five stage charging capability Bulk, Absorb, Float, Equalize, and Battery Saver |
| Battery temperature compensation With available temp sensor (battery temp 0 to 50deg C) |
| Remote inverter on/off switch With available pigtail to connect to dry contact |
| Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans |
| Overcurrent protection Yes, with two overlapping circuits |
| Overtemperature protection Yes on transformer, MOSFETS, and battery |
| Conformal coating on PCB`s for corrosion protection |
| Powder coated chassis & top for corrosion protection |
| Stainless steel fasteners for corrosion protection |
| Dual AC branch rated output breakers Optional on the ME2012 - AC breakers in 15 or 20 amp ratings |
| Series stacking interface 120/240 V |
| Listings ETL Listed to UL/cUL 458, CSA C22.2 #107.1-01 |
|
| Product Dimensions: | 13.75in x 12.65in x 8.0in | | We Deliver To: | 48 Continental US Only | | Manufacturer Warranty: | Magnum 3yr ltd warranty |
| Product NOTES - Read these: | - 1. Magnum accessories are priced at a discount, only to be purchased at this price with an Inverter.
- 2. ME-AGS-N auto generator start w/voltage & temp settings kit includes: AGS module (3 relay), 10' network cable, and a 60' remote temperature sensor cable.
- 3. ME-AGS-S stand alone auto generator start w/voltage & temp settings kit includes: AGS module (3 relay), Remote on/off/test switch, switch bezel, a 25' 6-wire cable, and has basic adjustments starting on battery voltage or temperature.
- 4. ME-RC50 remote w/LCD display & 50ft cable: The large LCD screen and at-a-glance LEDs display the inverter / charger status in a straightforward way. Soft keys give simple access to menus and a rotary encoder knob makes it easy to quickly scroll through menus and select settings. Critical settings are saved even if the power is disconnected. The ME-RC offers multiple functions in one place, including: inverter on/off, charger on/off, shore power breaker settings, AGS control, meter button, simple setup, and technical menus. A standard 50' 4-wire, twisted pair cable allows for plenty of room to display the Remote with ease.
- 5. ME-BMK batter charger monitor kit: Monitoring your battery bank is easy with the Battery Monitor Kit (ME-BMK)* from Magnum Energy. Acting as a "fuel gauge" for your batteries, the ME-BMK monitors their state of charge (SOC) and then provides this information in an easy-to-understand display via the ME-RC or ME-ARC remotes. With accurate SOC readings, you can avoid unneccessary battery recharging, saving on fuel and longterm maintenance costs.
- 6. ME-125F, ME 200F, ME300F fuse block assembly: Protection against costly damage: The ME-125F, ME-200F & ME-300F protect the battery bank, inverter, and cables from damage caused by short circuits and overloads.
|
|
Magnum Energy is a leading manufacturer of premium inverter/chargers for Mobile and Renewable Energy applications. With over 70 years of combined inverter manufacturing and design experience, Magnum Energy uses this experience to develop some of the industry's most reliable and advanced inverter/chargers. |
|
Ask Us
